| |
|
SHS-T700 Face |
SHS-T700 SIDE |
SHS-T700 REAR |
SHS-T700 FRONT |
| |
|
|
|
SHS-T700 SIDE |
SHS-T700 DOWN SIDE
|
SHS-T700 Heat Sync |
SHS-T700 PACKAGE |
1) Cooling Module
| Model |
Size(mm) |
Weight(g) |
Heat Resistance (℃/W) |
| SHS-T700 |
120(L)X92(W)X67(H) |
390 |
0.20 |
2) Fan
| 775 Type : PWM Control Fan |
- Revolution level: 700~2100RPM±10
- Noise level: 20~22dB
- Size : 92x92Χ25 |
3) Material
| - Heat pipe, Cooling pin : Pure Copper
- Block : Pure Aluminum (Nickel Cover)
|
4) Package Component
- SHS Cooling Module 1 Set
- Heat Delivery Grease1 Ea ( Proper Thermal Grease may attached
to get best effective Heat delivery )
- Product Manual 1 Ea
- In/Uninstall Guide driver |
|
1) Excellent cooling feature by pure copper heat sink.
2) Cooling Module Design for Intel Pentium4 (775socket). (SHS-T700
NOT need additional back plate)
3) Fan covers whole size of the Main Board to maximize cooling feature.
4) Minimize noise level without separate Fan Controller.
(Remark, OVERCLOCKING may bring noise or defect on the cooler.
|
1) Compulsion Install of Heat Sink Module may bring major defect
on the product.
2) Check all Component before install and contact your product provider
if missing any component for exchange or refund.
3) We will not be responsible for any other use of original designed
purpose. |
① Heat Delivery Grease Spread
|
|
| Remove and Clear CPU Face. |
Spread Heat Delivery Grease on CPU Face. |
② Cooling Module Installation
 |
 |
Place CPU Cooler on the Middle of CPU.
|
Install Fix Guide (As above picture) |
 |
 |
| Press Push Pin into the Fix Guide
(As above Picture) |
③ Connect Power Cable
 |
|
| Connect Fan Connector to the Main Board. |
|
④ Cooler Uninstall
 |
 |
| Use Un-install Guide driver to press into Fix Guide |
Carefully Push and turn Guide driver slowly to Colckwise. |
 |
|
| Use finger to pull upward to un-install. |
|
|
|
)
)
)
)
)
)
)
)
